View CXP86400_45361.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CXP86400/86490
CMOS 8-bit Single Chip Microcomputer
Description The CXP86400/86490 are CMOS 8-bit single chip microcomputers that serve as both piggyback and evaluator. The CXP86400/86490 are developed for evaluating the function of the CXP86440/86448/86460. Note that the CXP86400 corresponds to the fixed font and the CXP86490 corresponds to the custom font respectively. 64 pin PQFP (Ceramic)
Piggyback/ evaluator type
64 pin PSDIP (Ceramic)
Features * A wide instruction set (213 instructions) which covers various types of data Structure - 16-bit operation/multiplication and division/ Boolean Silicon gate CMOS IC bit operation instructions * Minimum instruction cycle 250ns at 16MHz operation 122s at 32kHz operation * Applicable EPROM LCC type 27C512 (Maximum 60K bytes are available.) * Incorporated RAM 1536 bytes (Excludes VRAM for on-screen display and sprite RAM) * EPROM for custom font (CXP86490 only) LCC27C512 (Maximum 12K bytes are available.) * Peripheral functions - A/D converter 8 bits, 6 channels, successive approximation method (Conversion time of 1.6s at 16MHz) - Serial interface 8-bit clock sync type, 1 channel - Timer 8-bit timer 8-bit timer/counter 19-bit time base timer 32kHz timer/ counter - On-screen display (OSD) 12 x 16 dots, 384 character types, 15 character colors, 24 characters x 2 lines frame background 8 colors/half blanking background on full screen 15 colors/half blanking edging/shadowing/rounding for every line background with shadow for every character/ double scanning sprite OSD; 12 x 16 dots, 1 screen, 8 colors for every dot - I2C bus interface - PWM output 8 bits, 8 channels 14 bits, 1 channel - Remote control reception circuit 8-bit pulse measurement counter, 6-stage FIFO - HSYNC counter - Watchdog timer * Interruption 13 factors, 13 vectors, multi-interruption possible * Standby mode SLEEP * Package CXP86400 64-pin ceramic PQFP CXP86490 64-pin ceramic PSDIP (Supports custom font) Note) Mask option depends on the type of the CXP86400/86490. Refer to the Product List for details.
Perchase of Sony's I2C components conveys a licence under the Philips I2C Patent Rights to use these components in an I2C system, provided that the system conforms to the I2C Standard Specifications as defined by Philips. Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
-1-
E96643-PS
CXP86400/86490
CXP86400 Pin Assignment in Piggyback Mode (Top View)
PC6/PWM6
PC7/PWM7
PD6/RMC
PD7/EC
PC0
64 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 INT2/PD0 HSYNC/PA7 VSYNC/PA6 RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 1 2
63 62
61 60 59
PC1
PC2
PC3
PC4
PC5
58
57 56
55
PF0/PWM0
54
53 52 51 50 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G
A12
A15
VDD
A14
A13
PF1/PWM1
PF2/PWM2
49 48 47 46 A8 A9 A11 NC OE A10 CE D7 D6 39 38 37 36 44 43 42 41 40 45 35 34 33
4 5 6 7 8 9 10 11 12 13 14 15 16 A6 A5 A4 A3 A2 A1 A0 NC D0 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21
NC
A7
3
D1
17 18 19 20 21 22 23
GND
NC
D2
D3
D4
D5
24
25 26
27
28 29 30
31 32
PG5
Note) 1. NC (Pin 40) is left open. 2. Vss (Pins 10 and 42) are both connected to GND. -2-
INT1/PG7
PG6
PG4
PG3
PB6
PB5
PB4
PB3
PB2
PB1
PB0
R
CXP86400/86490
CXP86400 Pin Assignment in Evaluator Mode (Top View)
PC6/PWM6
PC7/PWM7
PD6/RMC
PD7/EC
PC0
64 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 INT2/PD0 HSYNC/PA7 VSYNC/PA6 RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 1 2
63 62
61 60 59
PC1
PC2
PC3
PC4
PC5
58
57 56
55
PF0/PWM0
54
53 52 51 50 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G
A7/D7
A12
A15
VDD
A14
A13
PF1/PWM1
PF2/PWM2
49 48 47 46 A8 A9 A11 NC HALT A10 E/P I/T MON 39 38 37 36 44 43 42 41 40 45 35 34 33
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 A6/D6 A5/D5 A4/D4 A3/D3 A2/D2 A1/D1 A0/D0 NC RD 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21
NC
3
SYNC
GND
RST
WR
NC
C2
C1
PG5
Note) 1. NC (Pin 40) is left open. 2. Vss (Pins 10 and 42) are both connected to GND. -3-
INT1/PG7
PG6
PG4
PG3
PB6
PB5
PB4
PB3
PB2
PB1
PB0
R
CXP86400/86490
CXP86490 Pin Assignment in Piggyback Mode (Top View)
NC
D0
A1
A0
PC3 PC2 PC1 PC0 EC/PD7 RMC/PD6 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 INT2/PD0 HSYNC/PA7 VSYNC/PA6 RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 PB6 PB5 PB4 PB3 INT1/PG7 PG6 PG5
A2
A3
A4
A5
A6
1 2 3 D1 4 5 6 7 8 9 10 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 For custom font 13 12 11 10 9 8 7 6 5 4 3 2 1 32 31 30 A7 A12 A15 NC VDD A14 A13
64 63 62 61 60 59 58 57 56 55
PC4 PC5 PC6/PWM6 PC7/PWM7 PF0/PWM0 PF1/PWM1 PF2/PWM2 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G R PB0 PB1 PB2 PG3 PG4
A10
CE
D7
A11
D6
OE
NC
A9
A8
11
54
NC
D0
A1
A0
A2
A3
A4
A5
A6
12 13 14 D1 15 16 17 18 19 20 21 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20
53 52
13 12 11 10
9
8
7
6
5 4 3 2 A7 A12 A15 NC VDD A14 A13
51 50 49 48 47 46 45 44
For custom font
1 32 31 30
21 22 23 24 25 26 27 28 29
A10
CE
D7
A11
D6
OE
NC
A9
A8
22 23 24 25 26 27 28 29 30 31 32 D1 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20
43 42 41
NC
D0
A1
A0
13 12 11 10
A2
A3
A4
A5
A6
9
8
7
6
5 4 3 2 A7 A12 A15 NC VDD A14 A13
40 39 38 37 36 35 34 33
For programming
1 32 31 30
21 22 23 24 25 26 27 28 29
A10
CE
D7
Note) 1. NC (Pin 46) is left open. 2. Vss (Pins 16 and 48) are both connected to GND. -4-
A11
D6
OE
NC
A9
A8
CXP86400/86490
CXP86490 Pin Assignment in Evaluator Mode (Top View)
NC
D0
A0
PC3 PC2 PC1 PC0 EC/PD7 RMC/PD6 HS1/PD5 HS0/PD4 SI/PD3 SO/PD2 SCK/PD1 INT2/PD0 HSYNC/PA7 VSYNC/PA6 RST VSS XTAL EXTAL PA5/AN5 PA4/AN4 PA3/AN3 PA2/AN2 PA1/AN1 PA0/AN0 PB7 PB6 PB5 PB4 PB3 INT1/PG7 PG6 PG5
A1
A2
A3
A4
A5
A6
1 2 3 4 5 6 7 8 9 D1 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 For custom font 13 12 11 10 9 8 7 6 5 4 3 2 1 32 31 30 A7 A12 A15 NC VDD A14 A13
64 63 62 61 60 59 58 57 56
PC4 PC5 PC6/PWM6 PC7/PWM7 PF0/PWM0 PF1/PWM1 PF2/PWM2 PF3/PWM3 PF4/SCL0 PF5/SCL1/PWM4 PF6/SDA0 PF7/SDA1/PWM5 PE0/TO/ADJ PE1/PWM PE2/TEX/INT0 PE3/TX VSS VDD NC EXLC XLC PE4/YM PE5/YS PE6/I B G R PB0 PB1 PB2 PG3 PG4
CE
D7
A11
D6
NC
A9
A8
A10
10 11 12 13
OE
55 54 53 52
D0
NC
A0
13 12 11 10 14 15 16 17 18 19 20 D1 D2 GND NC D3 D4 D5 14 15 16 17 18 19 20
A1
A2
A3
A4
9
A5
6
8
7
A6
5 4 3 2 A7 A12 A15 NC VDD A14 A13
51 50 49 48 47 46 45
For custom font
1 32 31 30
21 22 23 24 25 26 27 28 29
CE
D7
A10
A11
D6
OE
NC
A9
A8
21 22 23 24 25 26 27 28 29 30 31 32 WR SYNC GND NC C2 C1 RST 14 15 16 17 18 19 20
44 43 42 41
A0/D0
A1/D1
A2/D2
A3/D3
RD
A4/D4
NC
A5/D5
A6/D6
13 12 11 10
9
8
7
6
5 4 3 2
40 A7/D7 39 A12 38 A15 NC VDD A14 A13 35 34 33 37 36
For programming
1 32 31 30
21 22 23 24 25 26 27 28 29
E/P
MON
Note) 1. NC (Pin 46) is left open. 2. Vss (Pins 16 and 48) are both connected to GND. -5-
HALT
A10
A11
NC
A9
A8
I/T
CXP86400/86490
EPROM Read Timing (Ta = -20 to +75C, VDD = 4.5 to 5.5V, Vss = 0V) Item Address data input delay time Address data hold time Symbol Pins A0 to A15 D0 to D7 A0 to A15 D0 to D7 0 Min. Max. 75 Unit ns ns
tACC tIH
0.8VDD A0 to A15 Address data 0.2VDD tACC tIH 0.8VDD Input data 0.2VDD
D0 to D7
Product List Products Optional item Mask
CXP86212 CXP86216 CXP86324 CXP86332 CXP86440 CXP86448 CXP86460 CXP86540 CXP86548 CXP86560
Package Oscillation clock ROM capacity Reset pin pull-up resistor Font data 12K bytes 16K bytes 24K bytes
64-pin plastic SDIP/QFP/LQFP 16MHz 32K bytes 40K bytes 48K bytes 60K bytes 40K bytes 48K bytes 60K bytes
Existent/Non existent User data
Products Optional item Piggyback/evaluator CXP86400-U01Q CXP86490-U01S Package Oscillation clock ROM capacity Reset pin pull-up resistor Font data Fixed 64-pin ceramic PQFP 64-pin ceramic PSDIP
16MHz EPROM 60K bytes Existent EPROM 12K bytes -6-
CXP86400/86490
CXP86400 Piggyback mode and evaluator mode can be switched as shown below.
Piggyback mode
Evaluator mode
LCC type EPROM
CXP86400
CPU probe Pin 1 marking
Pin 1 index EPROM Pin 1 marking
Note)
Note) Evaluation cap should be connected to the CPU probe.
CXP86490 Piggyback mode and evaluator mode can be switched as shown below.
LCC type EPROM
CXP86490
CPU probe
EPROM Pin 1 marking Pin 1 index
Two custom font EPROMs (same contents)
Note) Evaluation cap should be connected to the CPU probe.
Pin 1 marking
Piggyback mode
Evaluator mode
-7-
CXP86400/86490
Package Outline CXP86400
Unit: mm
64PIN PQFP (CERAMIC)
PIN No. 1 INDEX INDEX 64 18.7 0.5 16.3 0.2 52 52 64 PIN No.1 INDEX
1
51
51
1
1.0 0.05
4.5
22.3 0.25
24.7 0.5
1.27 0.13
0.4 0.08
0.3
18.12 0.2
12.02
14.22
6.0
1.05
0.7
33
19
19
33
1.3 0.3
0.75
20 9.48 11.66 15.58 0.2
32
32 0.6 0.9
20
PACKAGE STRUCTURE
PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE PQFP-64C-L02 AQFP064-C-0000-B LEAD TREATMENT LEAD MATERIAL PACKAGE WEIGHT CERAMIC GOLD PLATING 42 ALLOY 5.2g
3.57 0.36
CXP86490
64PIN PSDIP (CERAMIC)
70.98 0.55 15.58 0.2 64 33
+ 0.05 0.15 - 0.02
9.8 MAX
18.57 0.25
1.27 0.13 PIN NO.1 INDEX
1.27 0.25
0.46 0.08 0.9
1.778 0.1
3.43 0.38
11.24 MAX
PACKAGE STRUCTURE
PACKAGE MATERIAL SONY CODE EIAJ CODE JEDEC CODE PSDIP-64C-02 ADIP064-C-0750-B LEAD TREATMENT LEAD MATERIAL PACKAGE WEIGHT CERAMIC GOLD PLATING 42 ALLOY 22.8g
-8-
+ 0.05 0.25 - 0.02
1
32
19.05 0.25
18.12 0.2
18.12 0.2

▲Up To Search▲

Price & Availability of CXP86400

	To Download CXP86400 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .